A shed ramp is a simple and cost-effective way to improve access for sheds and outbuildings, making it easier for you or your family members to move items in and out of the shed.
The cost of building a shed ramp varies depending on the materials you choose and how much work you want to do yourself. You can expect to pay between $50 and $150 for a wooden shed ramp with a single slope.
If you want to add a second slope, you’ll need to spend roughly $75 to $200 on materials alone. The cost will also depend on how steep you want the ramp’s incline — steeper slopes are more expensive but also more stable than shallow ones.
You’ll also need to hire someone with experience in carpentry if you don’t have any skills yourself. Expect to pay anywhere from $100 to $400 per day, depending on what kind of experience they have working with the type of wood you choose and whether they charge an hourly rate or by the job.
Cost to build a shed ramp
The cost to build a shed ramp can vary depending on the materials used and the size of your shed. The average cost for a standard 8-ft by 10-ft shed is about $600. The average cost for a ramp to get a riding lawn mower into the shed is about $200.
You can build a wooden shed ramp with 2×6 lumber and plywood. You’ll need to cut the lumber at an angle, so you will also need a miter saw or circular saw. You may also need a nail gun or hammer to secure the plywood in place.
Step 1 – Measure and Cut Lumber
Measure the length of your shed’s door opening, then subtract 3 inches from that measurement (to account for the thickness of your plywood). Cut two pieces of 2×6 lumber at this length using the miter saw or circular saw. Attach one piece horizontally across the bottom of both sides of your door opening using wood screws and wood glue (if necessary).
Step 2 – Measure Plywood
Measure one piece of plywood at 8 feet wide by 10 feet long, then cut it using your circular saw or table saw (if necessary). Attach this piece vertically on top of one side’s opening using wood screws
If you’re looking to build a shed ramp, we can help.
It’s important to build the right size shed ramp for your specific needs. A shed ramp that is too small for your lawn mower will be more difficult to use and may not perform as well as one that is built with proper dimensions. The same is true if you try to fit two lawn mowers on a single shed ramp.
A good rule of thumb is to build a shed ramp that’s 4 feet wide by 8 feet long. This should give you enough room for most of the common riding mowers on the market today. You can always make adjustments later if you find yourself needing more space or need to add another component in your shed that may require additional space.
If you’re looking for some simple instructions on how to build a shed ramp, here are some basic guidelines:
Measurements – Measure the width of your riding mower and add 2″ to each side for support posts (4x6x8).
Wood – Use pressure-treated lumber or cedar for best results, especially if your riding mower will be spending time outdoors during inclement weather conditions (4x6x8).
Rails – Use pressure-treated plywood or T-
A shed ramp is a good way to get your lawn mower, golf cart or other small vehicles into the storage area of your shed. You can make your own shed ramp in just a few hours with some basic carpentry skills and tools.
Materials and Tools
The materials you’ll need to build a shed ramp depend on which design you decide to build. Here are some common materials:
2×6 lumber (8 feet long)
2×4 lumber (8 feet long)
2×4 lumber (12 inches long)
Joist hanger nails or screws (to attach the ramp to the floor joists)
Cement and sand mix (for filling holes in the floor joists)
How much does it cost to build a shed ramp?
The first step in estimating the cost of building a shed ramp is to determine the type of ramp you want to build. There are several options available and each has its own price tag.
A simple 2×4 wooden ramp can be built for less than $50, but adding a few more features like handrails or a ramp with two levels will increase the price significantly.
You can also build your own shed ramp using concrete blocks or interlocking pavers instead of wood. This will make your shed more stable and durable, but it will also cost more money.
The cost to build a shed ramp depends on the materials you use and the size of your shed. The average cost to build a shed ramp is $50 to $100.
Costs can vary depending on the size of your shed and the materials you choose.
If you’re looking for an estimate on what it might cost to build a shed ramp, read on! We’ll walk you through all the factors that affect cost, including:
The size of your shed (or other structure)
The type of material used for building the ramp
Where you live