Cost to build a deck homewyse

Do you want to know how much it costs to build a deck ? Homewyse is a free service that provides home improvement cost information and estimates for common home remodeling and repair projects. The website uses cost data from professionals in your local area to help homeowners get accurate estimates of the cost of their home improvement projects. The cost data includes labor and material costs as well as project and tool rental prices. Homewyse also includes additional information like average project duration and difficulty level so homeowners can make better informed decisions about their remodeling or repair projects.

Cost to build a deck homewyse

A 16×20 composite deck will typically cost between $7,000 and $11,000. The exact amount will vary depending on the size of your deck, the complexity of the design and other factors. If you need help finding a contractor in your area, check out our deck builder directory.

Materials for a 16×20 composite deck will cost $3,500 to $5,500. This is just an estimate; actual costs may vary depending on the type of material used for your decking boards and railings (pressure-treated lumber costs less than cedar). If you’re looking for materials only, consider buying lumber at a home center or lumberyard instead of buying a kit because it will likely be cheaper.

Labor costs for framing a 16×20 composite deck are included in our estimate above. Framing usually takes one day and costs between $1,200 and $1,700 per man crew — but again, this varies by region and experience level of workers.

How much does it cost to build a deck?

The cost of building a deck depends on several factors, such as the size and design of the deck, whether you hire a contractor or do it yourself, and the materials used. As a general rule, you should expect to pay $5-$10 per square foot for materials and installation. According to HomeAdvisor’s 2017 Cost vs. Value report, the average cost for a 16×20 deck is $7,500; most homeowners spend about $4,000-$6,000 on their decks.

The costs associated with framing a typical 16×20 deck are included in the overall estimate above.

How much does it cost to build a 16×20 deck?

Building a deck can be a fun, rewarding experience. It is also one of the easiest home improvement projects to complete, requiring only basic carpentry skills and tools. The cost of building a deck varies depending on its size, materials used and where you live. For example, the average cost of building a small deck in the Northeast is around $6,000 while the same project in the South might cost as little as $500. With that said, here’s how to determine what your project will cost:

Cost Factors

There’re several factors that affect the total cost of your deck project. These include size, location, quality of materials and labor costs.


The larger your deck is, the more expensive it will be to construct. A small 10′ x 10′ model will likely cost less than $2,000 while an expansive 50′ x 20′ model could easily run over $20,000. The bottom line: bigger decks are more expensive to build than smaller ones.


Your location plays an important role in determining how much you’ll pay for a new deck. For example, if you’re planning on building in a warm climate like Florida or Arizona then you’ll

You can get a rough idea of the cost of building a deck based on its size and materials. However, there are many variables that will affect the price.

The average cost for a basic wood deck is about $14-$16 per square foot, including framing, materials and labor. This includes installing joists and other framing components, as well as installing the deck boards themselves.

This figure does not include stairs or railings.

If you want concrete pavers instead of wood, the price will be about $6 more per square foot.

If you have an existing deck that needs repair or replacement, it will cost about $10 per square foot to replace one side with new material and install new steps or railings.

A deck is a wonderful addition to any home. It can add value, provide additional living space and be a great entertaining area. A deck can also be a source of frustration if you don’t choose the right builder.

The cost of building a deck will vary depending on its size and features, but here are some ballpark figures for costs:

Labor: $4 to $7 per square foot (for labor only)

Materials: $2 to $3 per square foot

Installation: $1 per square foot

Labor cost to frame a deck

The average cost to build a 16×20 deck is $9,500. That’s quite a bit higher than the $7,000 average for building a deck. The reason for this is that the materials cost more than just the materials for a smaller deck. There are also more people required to build it, and the bigger size makes for a more complicated design.

The cost of framing a 16×20 deck is going to be around $1,250-$2,000 per linear foot including materials and labor. This includes things like posts and beams, joists and rafters, and other structural components needed to support the decking material. A typical design will have 8-10 posts along with beams at each end of the house that supports your main beams which then support your joists (the boards).

You’ll also want to budget in around $100 per post for concrete footings if you’re building on dirt or gravel ground; otherwise you’ll need to build concrete blocks around each post before adding it into place.

The easiest way to figure out how much your project will cost is to get several quotes from local contractors who specialize in decks and then compare them side by side before deciding which one best fits your

The cost to frame a deck depends on the size of your deck and the materials you choose. Here’s how to get started estimating the cost of framing a deck.

How Much Does it Cost to Frame a Deck?

A simple deck that’s 12 feet by 12 feet will cost $2,000 to $2,500 in materials and another $1,000 in labor. That price range applies whether you want lattice or solid railings around the perimeter of the deck. The amount of money it costs to build a larger or smaller deck varies depending on the material used for framing and railings.

The average price for framing an average-sized 16×20 (1,200 square feet) deck is about $8 per square foot; however, this can vary depending on wood type and other factors such as location and labor rates. For example:

If you use pressure-treated lumber, which is cheaper than pine but still quite sturdy, expect to pay about $5 per square foot for construction materials alone (not including labor). This type of lumber requires less maintenance than pine or cedar but isn’t quite as strong either so it’s not ideal for areas where there are high winds or heavy snowfall.

If you opt for cedar instead of pressure

It depends on the size of your deck, but you’re looking at about $2,000 for a 16×20 deck.

It’s not just labor costs — there are other expenses to consider as well. Materials and equipment are big ones. You’ll need lumber, fasteners, and other supplies to build the deck itself. Then there’s the cost of tools like saws and drills that will make the project go more smoothly.

If you’re using a contractor to build your deck, expect to pay anywhere from $12-$24 per square foot for materials plus $20-$30 per hour for labor. That means a 16×20′ deck could cost anywhere from $2,000-$3,200 just in materials alone (not including any permits or design services).

The cost of framing a deck typically varies based on the size and materials used. The average cost to frame a deck is between $10 and $25 per square foot.

Framing a deck involves building the structure, which can be made from wood or composite materials. The cost of framing a deck also depends on whether you hire a contractor to do the work or do it yourself.

The average cost for framing a deck was about $19 per square foot in 2017, according to While this figure includes labor and materials, it does not include design fees, permits and other costs associated with building a new deck.

Labor costs for framing a deck vary by region, but the average is $4 to $5 per square foot of deck. The exact cost depends on the size and complexity of the project, including how many levels it has and what materials are used. For example, a two-level deck with railings and stairs might cost $8 to $10 per square foot while a simple deck without any extras might cost under $5 per square foot.

You can also hire a contractor to build your deck for you, but this will increase labor costs substantially as well as add other expenses like permits and inspections.

Here’s an example: If you have a 200-square-foot deck with four steps leading up to it and no railings, expect to pay around $500 in materials alone — not including tools or equipment rental fees. This doesn’t include the time spent building it; expect that to take three days if you do all the work yourself (which involves measuring, cutting, drilling and screwing).

Leave a Comment