Cost to build 383 stroker

383 stroker kit

383 stroker for sale,

how much does it cost to turn a 350 into a 383 stroker,

383 machine work cost,

383 stroker head

383 stroker camshafts

The cost to build a 383 engine is going to vary greatly depending on what you want as far as performance and build quality. A basic 383 stroker kit that includes the crank, rods and pistons will run around $3,500 – $4,000 from any one of the major aftermarket companies.

If you want to upgrade things like the head gasket or camshaft, this will add another $1,000 – $2,000 to your budget. When it comes time for assembly, a shop will charge anywhere from $600 – $1,000 depending on what kind of machine work they’re doing.

The biggest factor in cost is how much money you want to spend on parts. If you only plan on adding an intake manifold and headers with a stock camshaft and stock valvetrain, it won’t take long at all to assemble and install. You might even be able to do it yourself if you have some experience working on cars.

The cost to build a 383 stroker depends on several factors, such as the parts you use and your skill level.

You can get started with a lower-cost 350 engine kit for around $2,000. But you’ll want to upgrade the pistons, rods and camshafts to get the most from your new engine.

If you’re looking for a professional job with all of these upgrades, expect to pay $6,000 or more.

How much does it cost to build a 383 stroker?

The cost of building a 383 stroker engine varies depending on the type of components you choose and how much labor goes into the build. Most engines can be built for under $3,000 with mild performance goals in mind. However, if you want to go all out with forged pistons, high-compression heads and a higher-horsepower camshaft, then you should expect to spend more than $5,000.

Let’s take a look at some of the most important factors that affect the cost of building your own small-block Chevy:

Parts selection: The parts that make up your 383 stroker are determined by several factors such as your budget, desired horsepower, engine displacement and whether or not you plan on using nitrous oxide. For instance, if you’re looking for maximum horsepower then you’ll want to use forged pistons instead of cast pistons and upgrade the valvetrain components so they can handle higher RPMs. On the other hand, if all you need is an affordable daily driver then cast pistons will suffice along with an OEM valvetrain setup.

Labor costs: If you have experience working on cars or know someone who does then labor costs shouldn’t affect your decision

The first step is to choose a 383 stroker kit. There are many different manufacturers of these kits, but the most popular ones are from SVE and Dart. The basic difference between the two is that SVE uses an off-the-shelf block, while Dart requires you to use their own blocks or have one machined for you.

Once you have chosen a kit, it’s time for machine work. This means boring and honing your block to accept larger pistons, as well as modifying your crankshaft to work with those pistons. The cost of this can vary greatly depending on where you live; if you live near a major metropolitan area like Los Angeles or New York City then prices will be higher than if you live in a rural area without many machine shops nearby.

Once your machine work is done, it’s time to assemble your engine! This process involves bolting together all of the pieces that make up your motor, including connecting rods, pistons, rods and crankshaft (among other things).

After assembly comes installation and tuning — which means installing the engine into your car or truck and making sure everything works correctly! You’ll also need to make sure that all

383 stroker kit – $800 to $1,200

383 machine work cost – $2,000

how much does it cost to turn a 350 into a 383 stroker – $2,000 to $3,000

383 stroker for sale – $1,100 to $1,700

383 Stroker Engine Cost

383 Stroker Engine Kit

How Much Does It Cost To Turn A 350 Into A 383 Stroker?

383 Stroker For Sale

What is a 383 stroker and how much does it cost? A 383 stroker is an engine that has had its bore increased from 4.00″ to 4.25″ or greater. In addition, the crankshaft has been shortened to match the new stroke length, which results in more power than a stock motor of equal displacement. The major advantage of a stroked motor is increased torque over stock at lower RPMs, which makes it ideal for cars that need to accelerate quickly off the line or pull heavy loads at low revs such as drag racing or truck pulling.

383 strokers are popular in many forms of motorsports such as drag racing, circle track racing and off-road racing because they provide extra torque at low RPMs without sacrificing top end power like other modifications such as nitrous oxide injection or superchargers do. This makes them ideal for cars that need to accelerate quickly off the line or pull heavy loads at low RPMs such as trucks and tractors.

I have a 350 with a 383 stroker kit and I am looking to do some machine work on it. I have never done any engine building in my life. I found a local shop that will do the machine work for $135 per hour and they have warned me that it could take 5-6 hours of machine time.

I was hoping someone would be able to give me an idea of what the cost would be for this job?

-Deck the block (1/8″), clean bore with camera, hone cylinders, clean up pistons and rings, check clearances, align hone marks, deck cylinder heads (1/8″) clean valve guides, match valves to stems/valvesprings/rockers/valve locks (if needed), check cam journals for wear or damage and reset timing chains if needed (includes chain stretch).

-Installing pistons/rings/bearings/piston pins/gaskets/camshafts

The cost to build a 383 stroker depends on what you want and how much you are willing to spend. You can buy parts for as little as $600, but if you want to do it right, expect the price to be closer to $2,000.

For example, if you want a new crankshaft and connecting rods, that will add another $200 or so. If you want new pistons, rings and bearings, add another $300-$400 on top of that. And if you want to put together an entire 383 Stroker kit with all the necessary parts in one place (including the crankshaft), then add another $600-700 on top of that.

The bottom line is that it’s possible to build your own 383 stroker for less than $2,000, but if you’re looking for something bulletproof and reliable then expect the cost to be closer to $3-$4k

Leave a Comment